How To Install A Third Function Valve Kit
A Third Function Valve is a hydraulic control valve that's installed on your machine in order to add together an additional hydraulic function. It's frequently called a Tertiary Office equally it's used to control an boosted third hydraulic cylinder, the commencement two cylinders being on a front end-end loader (Tilt/Curl). A hydraulic control valve allows fluid to flow in and out of cylinders or hydraulic motors to extend/retract them with the push of a push button or moving a handle.
Most ordinarily these Third Function Valves are installed downstream from a loader valve via the power beyond port, and can exist used for a broad range of implements such as:
- Grapples
- Augers
- Snowplow tilt
- Snow blower
- Broom
A mutual configuration of tertiary function valve setups is shown below. They are typically connected to the power beyond of your loader valve, or they can exist connected directly to your hydraulic pump.
We sell Third Function Kits that can be installed onto any machine. If you have a Kubota Tractor, we may accept a automobile specific kit created that volition be everything you'll need to install a third function. If you lot don't have a Kubota Machine, or your machine isn't listed, our Universal Third Role Kit will piece of work bang-up.
Third Part Valve Vs. Diverter Valve
An culling to installing another hydraulic control valve (3rd Part Falve), is to install a diverter valve. These valves divert the catamenia of fluid from one hydraulic cylinder to another, either manually or electronically. Some other way to think of this is to imagine a tractor with a front-cease loader that you want to install a grapple. You could remove the hydraulic lines from the tilt circuit of your loader and attach them to your grapple every time you lot wanted to open up and close your grapple, all the same this doesn't make much sense. Alternatively, you could install a diverter valve in-line with your tilt function. When you activate that diverter, the flow of fluid would divert away from your tilt function, and get to your grapple. See the illustration below.
What's the benefit of a Third Function Valve over a diverter?
Diverter valves must divert fluid away from some other hydraulic implement, in order to provide fluid to the new implement. Nevertheless, with a true third function, y'all are installing a new control valve which tin can be used in conjunction with any of your other hydraulic implements.
Source: https://summit-hydraulics.com/what-is-a-third-function-valve-kit-and-what-are-the-benefits-of-one/
Posted by: gamblewhice1988.blogspot.com
0 Response to "How To Install A Third Function Valve Kit"
Post a Comment